WitrynaImron ® 2.1 + Polyurethane Reduced Gloss Topcoat ... Pot Life 2 1 2 1.5 Full Cure 7 days 6 days 6days 5 days Theoretical Coverage Per Gallon 754 ft 2 (25.4 m 2/l) @ 1 mil dft 376 ft 2 (12.7 m 2/l) @ suggested DFT of 2 mils Material losses during mixing and application will vary and must be taken into consideration when estimating job WitrynaImron 2.1 PR can be topcoated with other Axalta coatings including, but not limited to Imron 2.1 HG polyurethane enamel, Imron 1.2 HG™, Imron 1.5 ST-D™, and Imron 3.5 HG™ high gloss and variable gloss polyurethane enamels. Imron 2.1 PR™ may be used over most aged and hard cured coatings in good condition.
Imron 2.1 HG-C High Gloss Polyurethane Clearcoat - Axalta
WitrynaImron® 2.1 HG ™ + consists of a mixing system, mix quality QH, utilizing 19 tints and 1 binder to specific mixing formulas. Select Factory Package colors are also available. … WitrynaFor best results apply Imron 1.2 HG-C (HGC-01) over Imron 1.5 ST-D, Imron 1.5 PR, Imron 1.2 HG or other Axalta industrial coatings. All previously painted surfaces must … brother sdx900 manual
Imron 3.1 HG-D Polyurethane High Gloss Direct-To-Metal (Mix …
WitrynaImron Industrial Strength is engineered to be the fastest Imron yet, with the lowest environmental impact. Imron Industrial Strength Low VOC Polyurethane Primer is … WitrynaCorlar 2.1 HTA may be topcoated with other Corlar epoxies and/or Imron polyurethanes. Corlar 2.1 HTA may be used over most aged and hard cured coatings in good … WitrynaImron 2.1 HG Polyurethane Topcoat n/a 3680086 Axalta Imron Elite 3.5 VOC Polyurehane n/a 3680086 Axalta Nason Ful-Thane S/S n/a 3680088 Axalta Nason Ful-Cryl II Acrylic Enamel 3684080 3680080 Axalta ... events for march 2022